Publication detail

Simulator with integrated HW and SW for prediction of thermal comfort to provide feedback to the climate control system

POKORNÝ, J. KOPEČKOVÁ, B. FIŠER, J. JÍCHA, M.

Czech title

Simulátor s integrovaným HW a SW predikující tepelný komfort pro zpětnou vazbu systému řízení klimatu vozu

English title

Simulator with integrated HW and SW for prediction of thermal comfort to provide feedback to the climate control system

Type

conference paper

Language

en

Original abstract

The aim of the paper is to assemble a simulator for evaluation of thermal comfort in car cabins in order to give a feedback to the HVAC (heating, ventilation and air conditioning) system. The HW (hardware) part of simulator is formed by thermal manikin Newton and RH (relative humidity), velocity and temperature probes. The SW (software) part consists of the Thermal Comfort Analyser (using ISO 14505-2) and Virtual Testing Stand of Car Cabin defining the heat loads of car cabin. Simulator can provide recommendation for the climate control how to improve thermal comfort in cabin by distribution and directing of air flow, and also by amount of ventilation power to keep optimal temperature inside a cabin. The methods of evaluation of thermal comfort were verified by tests with 10 test subjects for summer (summer clothing, ambient air temperature 30 °C, HVAC setup: +24 °C auto) and winter conditions (winter clothing, ambient air temperature -5 °C, HVAC setup: +18 °C auto). The tests confirmed the validity of the thermal comfort evaluation using the thermal manikin and ISO 14505-2.

Czech abstract

Cílem práce je sestavit simulátor pro vyhodnocování tepelného komfortu v kabině automobilů, aby bylo možné získat zpětnou vazbu systému HVAC (topení, ventilace a klimatizace). HW (hardwarová) část simulátoru je tvořena tepelným manekýnem Newton a RH (relativní vlhkost), rychlostními a teplotními sondami. Část SW (software) se skládá z analyzátoru termálního komfortu (s použitím ISO 14505-2) a virtuálního zkušebního stánku v kabině vozidla, který definuje tepelné zatížení kabiny vozu. Simulátor může poskytnout doporučení pro kontrolu klimatu, jak zlepšit tepelnou pohodu v kabině, změnou distribuce a směrování proudění vzduchu, a také množství energie, aby se udržovala optimální teplota uvnitř kabiny. Metody hodnocení tepelného pohodlí byly ověřeny testy s 10 testovanými subjekty pro léto (letní oblečení, teplota okolního vzduchu 30 ° C, nastavení HVAC: +24 ° C auto) a zimní podmínky (zimní oblečení, teplota okolního vzduchu -5 ° C, nastavení HVAC: +18 ° C auto). Zkoušky potvrdily platnost hodnocení tepelné pohody pomocí tepelného manekýna a ISO 14505-2.

English abstract

The aim of the paper is to assemble a simulator for evaluation of thermal comfort in car cabins in order to give a feedback to the HVAC (heating, ventilation and air conditioning) system. The HW (hardware) part of simulator is formed by thermal manikin Newton and RH (relative humidity), velocity and temperature probes. The SW (software) part consists of the Thermal Comfort Analyser (using ISO 14505-2) and Virtual Testing Stand of Car Cabin defining the heat loads of car cabin. Simulator can provide recommendation for the climate control how to improve thermal comfort in cabin by distribution and directing of air flow, and also by amount of ventilation power to keep optimal temperature inside a cabin. The methods of evaluation of thermal comfort were verified by tests with 10 test subjects for summer (summer clothing, ambient air temperature 30 °C, HVAC setup: +24 °C auto) and winter conditions (winter clothing, ambient air temperature -5 °C, HVAC setup: +18 °C auto). The tests confirmed the validity of the thermal comfort evaluation using the thermal manikin and ISO 14505-2.

Keywords in Czech

Tepelný manekýn, ISO 14505-2, digram komfortních zón, tepelné zatížení kabiny vozu, tepelný komfort

Keywords in English

Thermal manikin, ISO 14505-2, Comfort zone diagram, Car cabin heat load , Thermal comfort

Released

04.06.2018

ISSN

2100-014X

Book

Proceedings of the International conference Experimental Fluid Mechanics 2017

Volume

180

Number

02085

Pages from–to

526–532

Pages count

6

BIBTEX


@inproceedings{BUT142566,
  author="Jan {Pokorný} and Barbora {Řehák Kopečková} and Jan {Fišer} and Miroslav {Jícha},
  title="Simulator with integrated HW and SW for prediction of thermal comfort to provide feedback to the climate control system ",
  booktitle="Proceedings of the International conference Experimental Fluid Mechanics 2017 ",
  year="2018",
  volume="180",
  number="02085",
  month="June",
  pages="526--532",
  issn="2100-014X"
}