Detail publikace
Ovlivnění struktury a mechanických vlastností hořčíkové slitiny AZ61 tepelným zpracováním
HORYNOVÁ, M. DOLEŽAL, P. GEJDOŠ, P. ZAPLETAL, J. JANOVÁ, D.
Český název
Ovlivnění struktury a mechanických vlastností hořčíkové slitiny AZ61 tepelným zpracováním
Anglický název
Influence of heat treatment on mechanical properties and microstructure of AZ61 magnesium alloy
Typ
článek v časopise - ostatní, Jost
Jazyk
en
Originální abstrakt
The contribution is focussed on the assessment of the influence of heat treatment of magnesium alloy AZ61 on its mechanical properties and chemical and microstructural heterogeneity. The experimental material was manufactured by the squeeze casting method. The microstructure of the alloy in as cast state was composed of solid solution, intermetallic phase Mg17Al12, and minor Mn-based phases. The heat treatment applied to the alloy was solution annealing at a temperature of 380 C and with graded dwell time from 1 to 16 hours. Chemical etching was employed in order to estimate the micro-segregation of the elements in the matrix qualitatively and to discern the phases in the microstructure. Differences in etching between the central part and the periphery of crystalline units are apparent in the metallographic images documented by light microscopy. The quantitative assessment of chemical heterogeneity was done via mapping and local chemical microanalyses. The intensity of chemical micro-heterogeneity of each specimen was further expressed using effective distribution coefficients.
Český abstrakt
Príspevek je zameren na posouzení vlivu tepelného zpracování horcíkové slitiny AZ61 na zmenu chemické a strukturní mikroheterogenity a mechanických vlastností. Horcíková slitina AZ61 byla vyrobena metodou squeeze casting. Mikrostruktura slitiny v litém stavu byla tvorena tuhým roztokem, intermetalickou fází Mg17Al12 a minoritními fázemi na bázi Al-Mn . Jako tepelné zpracování bylo pouzito rozpoustecí zíhání pri teplote 380 C a s odstupnovanou výdrzí 1 az 16 hodin. Pro kvalitativní odhad mikrosegregace prvku v matrici horcíkové slitiny a prítomných fází ve strukture bylo vyuzito leptání chemickými cinidly. Na snímcích ze svetelné mikroskopie byly zdokumentovány rozdíly heterogenity matrice ve stredu a na krajích krystalických utvaru v závislosti na intenzite naleptání. Kvantitativní hodnocení chemické mikroheterogenity bylo provádeno s vyuzitím map rozlození prvku (mapping) a lokální chemické mikroanalýzy. Intenzita chemické mikroheterogenity jednotlivých vzorku byla vyjádrena pomocí efektivních rozdelovacích koeficientu.
Anglický abstrakt
The contribution is focussed on the assessment of the influence of heat treatment of magnesium alloy AZ61 on its mechanical properties and chemical and microstructural heterogeneity. The experimental material was manufactured by the squeeze casting method. The microstructure of the alloy in as cast state was composed of solid solution, intermetallic phase Mg17Al12, and minor Mn-based phases. The heat treatment applied to the alloy was solution annealing at a temperature of 380 C and with graded dwell time from 1 to 16 hours. Chemical etching was employed in order to estimate the micro-segregation of the elements in the matrix qualitatively and to discern the phases in the microstructure. Differences in etching between the central part and the periphery of crystalline units are apparent in the metallographic images documented by light microscopy. The quantitative assessment of chemical heterogeneity was done via mapping and local chemical microanalyses. The intensity of chemical micro-heterogeneity of each specimen was further expressed using effective distribution coefficients.
Klíčová slova česky
AZ61, tepelné zpracování, mechanické vlastnosti
Klíčová slova anglicky
AZ61, heat treatment, mechanical properties
Rok RIV
2010
Vydáno
15.12.2010
ISSN
1210-0471
Časopis
Transaction of the VŠB-Technical university of Ostrava, Mechanical series
Ročník
LVI
Číslo
2
Strany od–do
73–82
Počet stran
10
BIBTEX
@article{BUT50716,
author="Miroslava {Horynová} and Pavel {Doležal} and Pavel {Gejdoš} and Josef {Zapletal} and Drahomíra {Janová},
title="Influence of heat treatment on mechanical properties and microstructure of AZ61 magnesium alloy",
journal="Transaction of the VŠB-Technical university of Ostrava, Mechanical series",
year="2010",
volume="LVI",
number="2",
month="December",
pages="73--82",
issn="1210-0471"
}