Detail publikace
Tváření strukturovaného povrchu nového typu solárního absorbéru hydroformováním
ŘIHÁČEK, J. MRŇA, L.
Český název
Tváření strukturovaného povrchu nového typu solárního absorbéru hydroformováním
Anglický název
Forming a Structured Surface of a New Type of Solar Absorber with Hydroforming
Typ
článek v časopise - ostatní, Jost
Jazyk
en
Originální abstrakt
One of the ways to increase efficiency of the solar absorber is modification of absorption area in the system of pyramidal cavities, where the incident radiation is absorbed by multiple reflections. The paper deals with the technology of production of the flow solar absorber with a structured surface in a single technological operation using hydroforming. Two laser-welded sheets are inserted into the forming chamber. Then the space between them is pressurized with hydraulic fluid which causes their form to the desired shape. The first part of this article describes hydroforming device. The second section deals with theoretical simulation of forming a different structured surface in the programming environment of ANSYS. As follows practical test of hydroforming is performed. Austenitic stainless steel X5CrNi18-10 was used as a material for the production of samples.
Český abstrakt
Jednou z možností zvýšení účinnosti solárního absorbéru je přetvoření absorpční plochy do soustavy jehlancovitých dutin, ve kterých se dopadající sluneční záření absorbuje vícenásobnými odrazy. Příspěvek se zabývá technologií výroby průtočného solárního absorbéru se strukturovaným povrchem v jediné technologické operací hydroformování. Dva laserem svařené plechy se vloží do tvářecí komory. Poté se prostor mezi nimi natlakuje hydraulickým médiem, které způsobí jejich zformování do potřebného tvaru. První část příspěvku se zabývá teoretickou simulací tváření strukturovaného povrchu v programovém prostředí ANSYS. Ve druhé části je popsán hydroformovací přípravek. Následují praktické zkoušky hydroformování. Jako materiál pro výrobu vzorků je použita austenitická korozivzdorná ocel X5CrNi18-10.
Anglický abstrakt
One of the ways to increase efficiency of the solar absorber is modification of absorption area in the system of pyramidal cavities, where the incident radiation is absorbed by multiple reflections. The paper deals with the technology of production of the flow solar absorber with a structured surface in a single technological operation using hydroforming. Two laser-welded sheets are inserted into the forming chamber. Then the space between them is pressurized with hydraulic fluid which causes their form to the desired shape. The first part of this article describes hydroforming device. The second section deals with theoretical simulation of forming a different structured surface in the programming environment of ANSYS. As follows practical test of hydroforming is performed. Austenitic stainless steel X5CrNi18-10 was used as a material for the production of samples.
Klíčová slova anglicky
solar absorber, hydroforming, austenitic steel, ANSYS, numeric simulation
Rok RIV
2015
Vydáno
01.10.2015
Nakladatel
Trans Tech Publications
Místo
Plzeň
ISSN
1022-6680
Číslo
1127
Strany od–do
49–54
Počet stran
6
BIBTEX
@article{BUT117792,
author="Jan {Řiháček} and Libor {Mrňa},
title="Forming a Structured Surface of a New Type of Solar Absorber with Hydroforming",
year="2015",
number="1127",
month="October",
pages="49--54",
publisher="Trans Tech Publications",
address="Plzeň",
issn="1022-6680"
}