Detail publikace

Výzkum hřbetního opotřebení při dokončovacím soustružení vysoce pevnostní oceli řeznou destičkou z CBN

MAJERÍK, J. BARÉNYI, I. SEDLÁK, J.

Český název

Výzkum hřbetního opotřebení při dokončovacím soustružení vysoce pevnostní oceli řeznou destičkou z CBN

Anglický název

Investigation of Flank Wear when Finish Turning of High Strength Steel with CBN Cutting Insert

Typ

článek v časopise ve Scopus, Jsc

Jazyk

en

Originální abstrakt

The article of authors is concentrated to an analysis of the certain topics connected with the process of finish turning, which are: finishing as a technological process, purpose-built machining, tool wear and tool life of cutting materials, criteria of flank wear, measuring methods of wearing of the cutting tools, types of the cutting materials and their using in the common practise. In the theoretical part of this article, there are results of different studies published, for which the goal was to review the dependency of cutting parameters on the tool life of the cutting material, comparison of the flank wear of stated cutting materials during certain cutting parameters of the process, analysing of the results of experiments oriented to tool life of cutting materials. In practical part, there is the description of particular parts connected with the own performed experiments, for which the aim was to determine the proper cutting parameters for the process of finish turning of hardened material by the hard-cutting material on the base of polycrystalline cubical boron nitride, evaluation and analysis of the results, determination of the conclusions from performed experiments and particular recommendations for the effective using of investigated cutting material.

Český abstrakt

Článek je zaměřen na analýzu určitých témat souvisejících s procesem dokončovacího soustružení, kterými jsou: dokončování jako technologický proces, účelové obrábění, opotřebení a životnost řezných materiálů, kritéria hřbetního opotřebení, způsoby měření opotřebení řezných nástrojů, druhy řezných materiálů a jejich použití v běžné praxi.

Anglický abstrakt

The article of authors is concentrated to an analysis of the certain topics connected with the process of finish turning, which are: finishing as a technological process, purpose-built machining, tool wear and tool life of cutting materials, criteria of flank wear, measuring methods of wearing of the cutting tools, types of the cutting materials and their using in the common practise. In the theoretical part of this article, there are results of different studies published, for which the goal was to review the dependency of cutting parameters on the tool life of the cutting material, comparison of the flank wear of stated cutting materials during certain cutting parameters of the process, analysing of the results of experiments oriented to tool life of cutting materials. In practical part, there is the description of particular parts connected with the own performed experiments, for which the aim was to determine the proper cutting parameters for the process of finish turning of hardened material by the hard-cutting material on the base of polycrystalline cubical boron nitride, evaluation and analysis of the results, determination of the conclusions from performed experiments and particular recommendations for the effective using of investigated cutting material.

Klíčová slova česky

tvrdé dokončovací soustružení; řezná rychlost; hřbetní opotřebení; kubický nitrid boru

Klíčová slova anglicky

hard finish turning; cutting speed; flank wear; cubical boron nitride

Vydáno

23.10.2019

Nakladatel

Elsevier

Místo

Austria

ISSN

1726-9679

Ročník

30

Číslo

1

Strany od–do

0215–0222

Počet stran

8

BIBTEX


@article{BUT161262,
  author="Jozef {Majerík} and Josef {Sedlák},
  title="Investigation of Flank Wear when Finish Turning of High Strength Steel with CBN Cutting Insert",
  year="2019",
  volume="30",
  number="1",
  month="October",
  pages="0215--0222",
  publisher="Elsevier",
  address="Austria",
  issn="1726-9679"
}