Detail publikace
Analýza vrstvy zinku na pozinkovaných ocelových desek
NOVOTNÝ, K. VACULIVIČ, T. GALIOVÁ, M. OTRUBA, V. KANICKÝ, V. KAISER, J. LIŠKA, M. SAMEK, O. MALINA, R. PÁLENÍKOVÁ, K.
Český název
Analýza vrstvy zinku na pozinkovaných ocelových desek
Anglický název
The use of zinc and iron emission lines in the depth profile analysis of zinc-coated steel
Typ
článek v časopise - ostatní, Jost
Jazyk
en
Originální abstrakt
In this study we report on the results of experiments devoted to the depth profile analysis of zinc-coated steel samples using the laser-induced breakdown spectroscopy (LIBS) technique. The dependence of zinc and iron emissions in three ablation atmospheres (air, argon, helium) was measured using the fundamental wavelength (1064 nm) of the Nd:YAG laser. The highest possible depth resolution was achieved by optimizing the experimental parameters, such as the delay time (which affects the tailing of the zinc emission signal), focusing conditions, energy delivered to the sample, and choice of buffer gases. Current research indicates that there is a constant need to optimize these parameters so that reliable depthprofiling analysis can be performed.
Český abstrakt
Analýza tlousťky a prostorového rozložení vrstvy zinku na pozinkovaných ocelových desek pomocí laserové spektroskopie.
Anglický abstrakt
In this study we report on the results of experiments devoted to the depth profile analysis of zinc-coated steel samples using the laser-induced breakdown spectroscopy (LIBS) technique. The dependence of zinc and iron emissions in three ablation atmospheres (air, argon, helium) was measured using the fundamental wavelength (1064 nm) of the Nd:YAG laser. The highest possible depth resolution was achieved by optimizing the experimental parameters, such as the delay time (which affects the tailing of the zinc emission signal), focusing conditions, energy delivered to the sample, and choice of buffer gases. Current research indicates that there is a constant need to optimize these parameters so that reliable depthprofiling analysis can be performed.
Klíčová slova anglicky
Laser-induced breakdown spectrometry (LIBS); Laser ablation; Coating; Depth profiling; Depth resolution
Rok RIV
2007
Vydáno
15.02.2007
ISSN
0169-4332
Časopis
Applied Surface Science
Ročník
253
Číslo
2
Strany od–do
3834–3843
Počet stran
10
BIBTEX
@article{BUT43558,
author="Jozef {Kaiser} and Miroslav {Liška} and Ota {Samek} and Radomír {Malina} and Kateřina {Brillová},
title="The use of zinc and iron emission lines in the depth profile analysis of zinc-coated steel",
journal="Applied Surface Science",
year="2007",
volume="253",
number="2",
month="February",
pages="3834--3843",
issn="0169-4332"
}