Detail publikace

Měření rychlosti tlakové vlny

Margetic V, Ban T, Samek O, Leis F, Niemax K, Hergenroder R

Český název

Měření rychlosti tlakové vlny

Anglický název

Shock-wave velocity of a femtosecond-laser-produced plasma

Typ

článek v časopise - ostatní, Jost

Jazyk

en

Originální abstrakt

Fluorescence measurements have been used to characterize the velocity of atoms in a femtosecond-laser-produced plasma. Nanogram amounts of a copper sample were ablated by the focused radiation (lambda = 775 nm) of an all-solid-state laser. The laser was operated at a pulse rate of 10 Hz with an energy of 200 muJ per pulse. The microplasma expanded into a defined argon atmosphere of pressures between 0.02 and 850 mbar. Atomic fluorescence was excited in the laser plume by a dye-laser pulse with the wavelength set to the line Cu I 282.4 nm. The narrowed beam of the dye-laser was directed into the plasma at different heights above the sample surface. The fluorescence radiation was raeasured with an echelle-spectrometer, equipped with an intensified-charge-coupled device as the detector. The velocity depends strongly on the pressure of the ambient atmosphere and the distance from the sample surface. The highest velocity found at an argon pressure of 0.02 mbar was 1.0 X 10(6) cm s(-1).

Český abstrakt

Článek pojednává o měření rychlosti tlakové vlny v plasmatu vytvořené fs laserovým pulsem. Podrobneji: The microplasma expanded into a defined argon atmosphere of pressures between 0.02 and 850 mbar. Atomic fluorescence was excited in the laser plume by a dye-laser pulse with the wavelength set to the line Cu I 282.4 nm. The narrowed beam of the dye-laser was directed into the plasma at different heights above the sample surface. The fluorescence radiation was raeasured with an echelle-spectrometer, equipped with an intensified-charge-coupled device as the detector. The velocity depends strongly on the pressure of the ambient atmosphere and the distance from the sample surface. The highest velocity found at an argon pressure of 0.02 mbar was 1.0 X 10(6) cm s(-1).

Anglický abstrakt

Fluorescence measurements have been used to characterize the velocity of atoms in a femtosecond-laser-produced plasma. Nanogram amounts of a copper sample were ablated by the focused radiation (lambda = 775 nm) of an all-solid-state laser. The laser was operated at a pulse rate of 10 Hz with an energy of 200 muJ per pulse. The microplasma expanded into a defined argon atmosphere of pressures between 0.02 and 850 mbar. Atomic fluorescence was excited in the laser plume by a dye-laser pulse with the wavelength set to the line Cu I 282.4 nm. The narrowed beam of the dye-laser was directed into the plasma at different heights above the sample surface. The fluorescence radiation was raeasured with an echelle-spectrometer, equipped with an intensified-charge-coupled device as the detector. The velocity depends strongly on the pressure of the ambient atmosphere and the distance from the sample surface. The highest velocity found at an argon pressure of 0.02 mbar was 1.0 X 10(6) cm s(-1).

Klíčová slova anglicky

atomic fluorescence; femtosecond laser; laser-induced plasma

Rok RIV

2004

Vydáno

01.04.2004

ISSN

0011-4626

Časopis

Czechoslovak Journal of Physics

Ročník

54

Číslo

4

Počet stran

6

BIBTEX


@article{BUT45430,
  author="Ota {Samek},
  title="Shock-wave velocity of a femtosecond-laser-produced plasma",
  journal="Czechoslovak Journal of Physics",
  year="2004",
  volume="54",
  number="4",
  month="April",
  issn="0011-4626"
}