Detail publikace
Stanovení optimální teploty tváření ložiskové oceli 100CrMo7-3 za poloohřevu
KLAKURKOVÁ, L. DOLEŽAL, P. ZAPLETAL, J. ŠVEJCAR, J.
Český název
Stanovení optimální teploty tváření ložiskové oceli 100CrMo7-3 za poloohřevu
Anglický název
Estabilishing optimum forming temperature of 100CrMo7-3 bearing steel under partial heating
Typ
článek v časopise - ostatní, Jost
Jazyk
cs
Originální abstrakt
The paper is concerned with problems of optimizing the temperature of forming grade 100CrMo7-3 bearing steel under partial heating. Experimental extablishment of the optimum range of forming temperatures was based on the results of tensile testing at elevated temperatures from 100 to 800oC. Experimental verification of the behavior of bearing steel under pressure was conducted via the upsetting test at elevated temperatures. The experimental part of the work is also concerned with the analysis of phase composition of hrade 100CrMo7-3 bearing steel using computer simulation, and by the verification of simulation via metallographic evaluation.
Český abstrakt
The paper is concerned with problems of optimizing the temperature of forming grade 100CrMo7-3 bearing steel under partial heating. Experimental extablishment of the optimum range of forming temperatures was based on the results of tensile testing at elevated temperatures from 100 to 800oC. Experimental verification of the behavior of bearing steel under pressure was conducted via the upsetting test at elevated temperatures. The experimental part of the work is also concerned with the analysis of phase composition of hrade 100CrMo7-3 bearing steel using computer simulation, and by the verification of simulation via metallographic evaluation.
Anglický abstrakt
The paper is concerned with problems of optimizing the temperature of forming grade 100CrMo7-3 bearing steel under partial heating. Experimental extablishment of the optimum range of forming temperatures was based on the results of tensile testing at elevated temperatures from 100 to 800oC. Experimental verification of the behavior of bearing steel under pressure was conducted via the upsetting test at elevated temperatures. The experimental part of the work is also concerned with the analysis of phase composition of hrade 100CrMo7-3 bearing steel using computer simulation, and by the verification of simulation via metallographic evaluation.
Klíčová slova česky
100CrMo7-3; bearing stee;l forming temperature; partial heating
Klíčová slova anglicky
100CrMo7-3; bearing stee;l forming temperature; partial heating
Rok RIV
2008
Vydáno
22.10.2008
Nakladatel
Politechnika Opolska
Místo
Opole
ISSN
1429-6055
Časopis
Zeszyty naukowe politechniki Opolskiej seria Mechanika
Ročník
2008
Číslo
327
Strany od–do
207–212
Počet stran
6
BIBTEX
@article{BUT47331,
author="Lenka {Klakurková} and Pavel {Doležal} and Josef {Zapletal} and Jiří {Švejcar},
title="Stanovení optimální teploty tváření ložiskové oceli 100CrMo7-3 za poloohřevu",
journal="Zeszyty naukowe politechniki Opolskiej seria Mechanika",
year="2008",
volume="2008",
number="327",
month="October",
pages="207--212",
publisher="Politechnika Opolska",
address="Opole",
issn="1429-6055"
}