Detail publikace
Mikrostrukturní změny ve slitině IN713LC během creepu
POSPÍŠILOVÁ, S. KIANICOVÁ, M. VLASÁK, T. HUTAŘ, P. PODRÁBSKÝ, T. HAKL, J.
Český název
Mikrostrukturní změny ve slitině IN713LC během creepu
Anglický název
The Microstructure Changes in IN713LC during the Creep Exposure
Typ
článek v časopise - ostatní, Jost
Jazyk
en
Originální abstrakt
Nickel-based creep resisting alloys (strengthened by Ni3Al,Ti) are the basic materials for high-temperature constructional parts in aircraft engines and energy units. These parts are exposed to combined effects of mechanical stresses, high temperature and dioxide-corrosion conditions. The microstructure changes of cast polycrystalline Ni-based superalloy IN713LC after creep exposure were studied. Three specimens with three different diameters were used for creep tests. The degradation stage (damage parameter ?) was determined for all parts of specimens. Individual parts of specimens were metallographic observed and analyzed by image analysis after rupture. The results were compared with model of stress distribution in the specimen with potential damage in the centre of the specimen.
Český abstrakt
Niklové superslitiny zpevněné vytvrzující fází patří mezi základní materiály používané pro vysokoteplotně namáhané konstrukční díly leteckých motorů a energetických jednotek. Tyto části jsou vystaveny kombinovaným účinkům mechanického namáhání, vysokým teplotám a oxidačním-korozním podmínkách. Byly studovány mikrostrukturní změny polykrystalické niklové superslitiny IN713LC po creepové expozici. Pro creepové testy byly použity tři vzorky se třemi různými průměry. Pro každý průměr každého vzorku byl stanoven parametr degradace. Jednotlivé části vzorků po creepovém zatěžování byly metalograficky studovány a analyzovány pomocí obrazové analýzy. Výsledky byly porovnány s modelem rozdělení napětí ve vzorku.
Anglický abstrakt
Nickel-based creep resisting alloys (strengthened by Ni3Al,Ti) are the basic materials for high-temperature constructional parts in aircraft engines and energy units. These parts are exposed to combined effects of mechanical stresses, high temperature and dioxide-corrosion conditions. The microstructure changes of cast polycrystalline Ni-based superalloy IN713LC after creep exposure were studied. Three specimens with three different diameters were used for creep tests. The degradation stage (damage parameter ?) was determined for all parts of specimens. Individual parts of specimens were metallographic observed and analyzed by image analysis after rupture. The results were compared with model of stress distribution in the specimen with potential damage in the centre of the specimen.
Klíčová slova česky
creep, parametr poškození, mikrostrukturní změny, rafting, obrazová analýza
Klíčová slova anglicky
creep, damage parameter, microstructure changes, rafting, image analysis
Rok RIV
2011
Vydáno
01.01.2011
Nakladatel
TransTech Publication
Místo
Switzerland
ISSN
1022-6680
Časopis
Advanced Materials Research
Ročník
278
Číslo
1
Strany od–do
120–125
Počet stran
6
BIBTEX
@article{BUT49976,
author="Simona {Hutařová} and Marta {Kianicová} and Tomáš {Vlasák} and Pavel {Hutař} and Tomáš {Podrábský} and Jan {Hakl},
title="The Microstructure Changes in IN713LC during the Creep Exposure",
journal="Advanced Materials Research",
year="2011",
volume="278",
number="1",
month="January",
pages="120--125",
publisher="TransTech Publication",
address="Switzerland",
issn="1022-6680"
}