Detail publikace
Mikrostruktura a nárazové vlasnosti feritické ODS ODM401 (14%CR ODS typu MA957)
HADRABA, H. KAZIMIERZAK, B.STRATIL, L. DLOUHÝ, I.
Český název
Mikrostruktura a nárazové vlasnosti feritické ODS ODM401 (14%CR ODS typu MA957)
Anglický název
Microstructure and impact properties of ferritic ODS ODM401 (14%Cr-ODS of MA957 type)
Typ
článek v časopise - ostatní, Jost
Jazyk
en
Originální abstrakt
The oxide dispersion strengthened (ODS) steel ODM401 is one of the ODS steels developed during the 1960–1970s as a structural tubing material for fast breeder reactors, mainly because of their hightemperature strength and swelling resistance under irradiation. Nowadays, these steels are taken under consideration as a structural material for blanket and heat exchanger components in fusion reactors. The aim of the work was to describe fracture behaviour of ODM401 steel in connection to the microstructure. The microstructure of as-extruded ODM401 steel has fine grains elongated in the extrusion direction. The two population of Y–Ti–O particles sizes were found in the microstructure of size about 10–20 nm and 2– 3 nm. Temperature dependence of KLST impact energy was measured and transition temperature tDBTT evaluated about -110 degree C. The fracture surface was formed by alternated cleavage areas connected by inclined areas fractured by dimple micro mechanism proportional to the impact energy.
Český abstrakt
Oxidačně disperzně zpevněná (ODS) ocel ODM401 je jednou z ODS ocelí vyvinutou v šedesátých až sedmdesátých letech dvacátého století jako konstrukční materiál pro výrobu trubek pro rychlé množivé rekatory hlavně kvůli jejich vysokoteplotní pevnosti a odolnosti proti tečení v prostředí radiace. V současnosti jsou tyto oceli uvažovány jako konstrukční materiály pro obálky a tepelné výměníky ve fúzních rekatorech. Cílem této práce bylo popsat lomové chování oceli ODM401 v souvislosti s mikrostrukturou. Mikrostruktura extrudované oceli je tvořena jemnými zrny protáhlými ve směru extruze. V mikrostruktuře oceli byla zjištena bi-modální velikostní distribuce částic Y-Ti-O velikosti přibližně 10-20 nm a 2-3 nm. Z teplotní závislosti nárazové práce zjištěné na tělesech typu KLST byla získána tDBTT -110 stupňů C. Lomové plochy byly tvořeny střídajícími se štěpnými plochami a plochami porušenými mechanismem mikrodutin proporcionálně k měřené hodnotě nárazové práce.
Anglický abstrakt
The oxide dispersion strengthened (ODS) steel ODM401 is one of the ODS steels developed during the 1960–1970s as a structural tubing material for fast breeder reactors, mainly because of their hightemperature strength and swelling resistance under irradiation. Nowadays, these steels are taken under consideration as a structural material for blanket and heat exchanger components in fusion reactors. The aim of the work was to describe fracture behaviour of ODM401 steel in connection to the microstructure. The microstructure of as-extruded ODM401 steel has fine grains elongated in the extrusion direction. The two population of Y–Ti–O particles sizes were found in the microstructure of size about 10–20 nm and 2– 3 nm. Temperature dependence of KLST impact energy was measured and transition temperature tDBTT evaluated about -110 degree C. The fracture surface was formed by alternated cleavage areas connected by inclined areas fractured by dimple micro mechanism proportional to the impact energy.
Klíčová slova česky
KLST, ODS oceli, ODM401, nárazové chování
Klíčová slova anglicky
KLST, ODS steels, ODM401, impact behaviour
Rok RIV
2011
Vydáno
03.10.2011
ISSN
0022-3115
Ročník
417
Číslo
1-3
Strany od–do
241–244
Počet stran
4
BIBTEX
@article{BUT76002,
author="Hynek {Hadraba} and Luděk {Stratil} and Ivo {Dlouhý},
title="Microstructure and impact properties of ferritic ODS ODM401 (14%Cr-ODS of MA957 type)",
year="2011",
volume="417",
number="1-3",
month="October",
pages="241--244",
issn="0022-3115"
}