Možnosti diagnostiky poškození převodovek a ložisek metodou akustické emise.

Possibilities of the damage diagnostics of gearboxes and bearings with acoustic emissions method

článek ve sborníku ve WoS nebo Scopus

en

Experiments focused on identification of damage of bearings and automobile gearbox with usage of acoustic emission method is presented in this paper. The first group of experiments was carried out on durability test stations for radial and axial bearings. Sensing of AE signal on devices for radial bearings testing was complicated by the position of the tested bearing inside the station. As a solution, waveguides were used, with one end touching the outer ring of the bearing. Other sensors were placed on the surface of the testing station. The second group of tests consisted of measuring of signal of an intact and a damaged automotive gearbox during different functional conditions. In the gearbox the needle bearing, axial bearing and tooth wheel in fifth speed gear were artificially damaged. The goal of these experiments was to create the methodology of measurement and to compare the records of measurement of acoustic emission signal with level of vibration, noise emission and temperature. In article the first measurements that show the suitability of the chosen methodology for testing are presented.

V příspěvku jsou popsány možnosti dentifikace cyklického poškození převodovky osobního automobilu a růzmých typů ložisek metodou akustické emise.

Experiments focused on identification of damage of bearings and automobile gearbox with usage of acoustic emission method is presented in this paper. The first group of experiments was carried out on durability test stations for radial and axial bearings. Sensing of AE signal on devices for radial bearings testing was complicated by the position of the tested bearing inside the station. As a solution, waveguides were used, with one end touching the outer ring of the bearing. Other sensors were placed on the surface of the testing station. The second group of tests consisted of measuring of signal of an intact and a damaged automotive gearbox during different functional conditions. In the gearbox the needle bearing, axial bearing and tooth wheel in fifth speed gear were artificially damaged. The goal of these experiments was to create the methodology of measurement and to compare the records of measurement of acoustic emission signal with level of vibration, noise emission and temperature. In article the first measurements that show the suitability of the chosen methodology for testing are presented.

akustická emise, ložisko, převodovka, kontaktní únava, pitting, vibrace

Acoustic emission, bearing, gearbox, contact fatigue, pitting, vibration,

2012

16.04.2012

ndt.net

Durban

978-0-620-52872-6

Proceedings - 18th World Conference on Non-Destructive Testing

1

651–658

8