Branch Details
Fundamentals of Mechanical Engineering
Original title in Czech: Základy strojního inženýrstvíFSIAbbreviation: B-STIAcad. year: 2019/2020
Programme: Engineering
Length of Study: 3 years
Accredited from: 1.9.2003Accredited until: 31.8.2022
Profile
The bachelor’s study programme “Mechanical Engineering” is intended as the most effective way to prepare students for the study in a follow-up master’s study programme. The graduates will have a wide professional basis enabling them to continue in some branch in a two-year follow-up master’s study programme specialised in mechanical engineering.
- The graduates may choose any branch within a two-year follow-up master’s study programme (today approximately 20 branches).
- Bachelor’s study graduates may immediately start their professional career; they may work as e.g. technicians in development, constructional, and technological institutes or enterprises, manufacturing plants, services and trade.
Key learning outcomes
Graduates will have gained fundamental engineering knowledge:
- in general theoretical subjects (mathematics, geometry, physics, chemistry, etc.)
- in subjects focusing on mechanical engineering (mechanics of rigid and deformable bodies , materials science, thermomechanics, hydromechanics, etc.)
- in the area of mechanical engineering technologies (manufacturing, machining, etc.).
Bachelor’s study also involves mastering a foreign language at an intermediate level.
Occupational profiles of graduates with examples
- The graduates may continue their studies in a two-year follow-up master's study programme at the Faculty of Mechanical Engineering, at request and usually without entrance examinations.
- They may choose any branch within a two-year follow-up master's study programme at the Faculty of Mechanical Engineering. Today they can choose from approximately 20 branches.
- Graduates may also continue their studies in any follow-up master's study programme provided by other technical university.
Guarantor
Course structure diagram with ECTS credits
Abbreviation | Title | L. | Cr. | Com. | Compl. | Hr. range | Gr. | Op. |
---|---|---|---|---|---|---|---|---|
A3 | English 3 | en | 0 | Compulsory-optional | Cr | Cj - 26 / Cj - 26 / CPP - 13 / CPP - 13 | English | yes |
A5 | English 5 | en | 0 | Compulsory-optional | Cr | Cj - 26 / Cj - 26 | English | yes |
3CD | CAD | cs | 2 | Compulsory-optional | Cr | CPP - 26 | 3CD | yes |
3CD-A | CAD | en | 2 | Compulsory-optional | Cr | CPP - 26 | 3CD | yes |
1CH-A | Chemistry | en | 3 | Compulsory-optional | Ex | P - 26 | 1CH | yes |
1CH | Chemistry | cs | 3 | Compulsory-optional | Ex | P - 26 | 1CH | yes |
1IN-A | Computer Science | en | 5 | Compulsory-optional | GCr | P - 26 / CPP - 26 | 1IN | yes |
1IN | Computer Science | cs | 5 | Compulsory-optional | GCr | P - 26 / CPP - 26 | 1IN | yes |
1K-A | Machine Design Fundamentals | en | 4 | Compulsory-optional | Cr,Ex | P - 13 / CPP - 26 | 1K | yes |
1K | Machine Design Fundamentals | cs | 4 | Compulsory-optional | Cr,Ex | P - 13 / CPP - 26 | 1K | yes |
1M-A | Mathematics I | en | 9 | Compulsory-optional | Cr,Ex | P - 52 / C1 - 44 / CPP - 8 | 1M | yes |
1M | Mathematics I | cs | 9 | Compulsory-optional | Cr,Ex | P - 52 / C1 - 44 / CPP - 8 | 1M | yes |
1PG-A | Computer Geometry and Graphics | en | 5 | Compulsory-optional | Cr,Ex | P - 26 / CPP - 26 | 1PG | yes |
1PG | Computer Geometry and Graphics | cs | 5 | Compulsory-optional | Cr,Ex | P - 26 / CPP - 26 | 1PG | yes |
YDF | Introduction to Design | cs | 2 | Elective (voluntary) | Cr | P - 13 / A - 26 | yes | |
0KD | Selected Chapters from Descriptive Geometry | cs | 0 | Elective (voluntary) | Cr | P - 26 | yes | |
0ZK | Selected Chapters from Fundamentals of Design | cs | 0 | Elective (voluntary) | Cr | P - 26 | yes | |
0KM | Selected Chapters from Mathematics | cs | 0 | Elective (voluntary) | Cr | P - 26 | yes | |
YKA | Fundamentals of Drawing | cs | 0 | Elective (voluntary) | Cr | A - 39 | yes |
Abbreviation | Title | L. | Cr. | Com. | Compl. | Hr. range | Gr. | Op. |
---|---|---|---|---|---|---|---|---|
2IV | Information Knowledge - Information Literacy | cs | 1 | Compulsory | Cr | CPP - 13 | yes | |
A4 | English 4 | en | 0 | Compulsory-optional | Cr | Cj - 26 / Cj - 26 / CPP - 13 / CPP - 13 | English | yes |
A6 | English 6 | en | 0 | Compulsory-optional | Cr | Cj - 26 / Cj - 26 | English | yes |
2K-A | Machine Design | en | 3 | Compulsory-optional | GCr | P - 13 / CPP - 26 | 2K | yes |
2K | Machine Design | cs | 3 | Compulsory-optional | GCr | P - 13 / CPP - 26 | 2K | yes |
2F | Physics I | cs | 7 | Compulsory-optional | Cr,Ex | P - 39 / L - 13 / C1 - 26 | 2F | yes |
2F-A | Physics I | en | 7 | Compulsory-optional | Cr,Ex | P - 39 / L - 13 / C1 - 26 | 2F | yes |
2M | Mathematics II | cs | 8 | Compulsory-optional | Cr,Ex | P - 39 / C1 - 44 / CPP - 8 | 2M | yes |
2M-A | Mathematics II | en | 8 | Compulsory-optional | Cr,Ex | P - 39 / C1 - 44 / CPP - 8 | 2M | yes |
2NU | Numerical Methods | cs | 4 | Compulsory-optional | Cr,Ex | P - 13 / CPP - 26 | 2NU | yes |
2NU-A | Numerical Methods | en | 4 | Compulsory-optional | Cr,Ex | P - 13 / CPP - 26 | 2NU | yes |
2VT | Manufacturing Technology I | cs | 3 | Compulsory-optional | GCr | L - 26 | 2VT | yes |
2VT-A | Manufacturing Technology I | en | 3 | Compulsory-optional | GCr | L - 26 | 2VT | yes |
BUM-A | Introduction to Material Science and Engineering | en | 6 | Compulsory-optional | Cr,Ex | P - 39 / L - 26 | BUM | yes |
BUM | Introduction to Material Science and Engineering | cs | 6 | Compulsory-optional | Cr,Ex | P - 39 / L - 26 | BUM | yes |
0KF | Selected Topics in Physics I | cs | 0 | Elective (voluntary) | Cr | P - 26 | yes | |
0UM | Materials Engineering - Selected Topics | cs | 0 | Elective (voluntary) | Cr | P - 26 | yes | |
0VP | Selected Chapters from Programming | cs | 2 | Elective (voluntary) | Cr | CPP - 26 | yes |
Abbreviation | Title | L. | Cr. | Com. | Compl. | Hr. range | Gr. | Op. |
---|---|---|---|---|---|---|---|---|
3F | Physics II | cs | 8 | Compulsory | Cr,Ex | P - 39 / L - 26 / C1 - 26 | yes | |
3M | Mathematics III | cs | 8 | Compulsory | Cr,Ex | P - 39 / C1 - 39 / CPP - 13 | yes | |
3ST | Statics | cs | 5 | Compulsory | Cr,Ex | P - 26 / C1 - 12 / CPP - 14 | yes | |
3SV | Structure and Properties of Materials | cs | 5 | Compulsory | Cr,Ex | P - 26 / L - 26 | yes | |
3VT | Production Technology II | cs | 2 | Compulsory | GCr | L - 26 | yes | |
A3 | English 3 | en | 0 | Compulsory-optional | Cr | Cj - 26 / Cj - 26 / CPP - 13 / CPP - 13 | English | yes |
A5 | English 5 | en | 0 | Compulsory-optional | Cr | Cj - 26 / Cj - 26 | English | yes |
0AA | Applied Algebra for Engineers | cs | 0 | Elective (voluntary) | Cr | P - 26 | yes | |
0ZP | Aventics Pneumobil Racing | cs | 3 | Elective (voluntary) | GCr | L - 26 / L - 26 / C1 - 13 / C1 - 13 | yes | |
0HZ | Barrel Guns | cs | 2 | Elective (voluntary) | GCr | P - 26 / C1 - 13 | yes | |
0MI | Practical Materials Engineering on Industrial Artefacts | cs | 0 | Elective (voluntary) | Cr | P - 8 / L - 12 / C1 - 3 | yes | |
0SV | Engineering Materials - Selected Topics | cs | 0 | Elective (voluntary) | Cr | P - 26 | yes | |
0FK | Selected Topics in Physics II | cs | 2 | Elective (voluntary) | Cr | P - 26 | yes |
Abbreviation | Title | L. | Cr. | Com. | Compl. | Hr. range | Gr. | Op. |
---|---|---|---|---|---|---|---|---|
6AA | Automation | cs | 5 | Compulsory | Cr,Ex | P - 26 / L - 4 / CPP - 22 | yes | |
4KI | Kinematics | cs | 5 | Compulsory | Cr,Ex | P - 26 / C1 - 12 / CPP - 14 | yes | |
4KC | Design and CAD | cs | 2 | Compulsory | GCr | CPP - 26 | yes | |
4M | Mathematics IV | cs | 5 | Compulsory | Cr,Ex | P - 26 / C1 - 26 | yes | |
3NU | Numerical Methods II | cs | 2 | Compulsory | GCr | CPP - 26 | yes | |
DTB | Machining Technology | cs | 6 | Compulsory | Cr,Ex | P - 39 / L - 39 | yes | |
A4 | English 4 | en | 0 | Compulsory-optional | Cr | Cj - 26 / Cj - 26 / CPP - 13 / CPP - 13 | English | yes |
A6 | English 6 | en | 0 | Compulsory-optional | Cr | Cj - 26 / Cj - 26 | English | yes |
4PP-A | Strength of Materials I | en | 7 | Compulsory-optional | Cr,Ex | P - 52 / C1 - 12 / CPP - 14 | strenght and stress | yes |
4PP | Strength of Materials I | cs | 7 | Compulsory-optional | Cr,Ex | P - 52 / C1 - 12 / CPP - 14 | strenght and stress | yes |
DPT | Algorithmization and Programming Techniques | cs | 0 | Elective (voluntary) | Cr | P - 26 / CPP - 26 | yes | |
0MV | Calculus with MAPLE | cs | 0 | Elective (voluntary) | Cr | CPP - 26 | yes | |
0MS | Mathematical Software | cs | 3 | Elective (voluntary) | Cr | CPP - 26 | yes | |
0EK | Up-to-date Energy Systems and Bachelor's Theses | cs | 0 | Elective (voluntary) | Cr | P - 26 | yes | |
0PF | Computer Physics | cs | 0 | Elective (voluntary) | Cr | CPP - 26 | yes | |
0SS | Statistical Software | cs | 2 | Elective (voluntary) | Cr | CPP - 26 | yes | |
0PP | Selected Topics in Strength of Materials | cs | 2 | Elective (voluntary) | Cr | P - 26 / P - 26 | yes |
Abbreviation | Title | L. | Cr. | Com. | Compl. | Hr. range | Gr. | Op. |
---|---|---|---|---|---|---|---|---|
5DT | Dynamics | cs | 5 | Compulsory | Cr,Ex | P - 26 / C1 - 12 / CPP - 14 | yes | |
5TE | Technology II | cs | 4 | Compulsory | Cr,Ex | P - 26 / L - 26 | yes | |
6TT | Thermomechanics | cs | 6 | Compulsory | Cr,Ex | P - 39 / C1 - 26 | yes | |
5FM | Materials Physics | cs | 5 | Compulsory-optional | Cr,Ex | P - 39 / L - 26 | 1 | yes |
5PP-A | Strength of Materials II | en | 5 | Compulsory-optional | Cr,Ex | P - 39 / C1 - 14 / CPP - 12 | 1 | yes |
5PP | Strength of Materials II | cs | 5 | Compulsory-optional | Cr,Ex | P - 39 / C1 - 14 / CPP - 12 | 1 | yes |
6MS | Limit States of Materials and Structures | cs | 4 | Compulsory-optional | Cr,Ex | P - 26 / L - 26 | 2 | yes |
6SR | Construction of Production Machines and Robots | cs | 4 | Compulsory-optional | GCr | P - 26 / L - 26 | 2 | yes |
6SM | Engineering Metrology I | cs | 4 | Compulsory-optional | Cr,Ex | P - 26 / L - 26 | 2 | yes |
5KS-A | Machine Design - Machine Elements | en | 5 | Compulsory-optional | Cr,Ex | P - 39 / CPP - 26 | 3 | yes |
5KS | Machine Design - Machine Elements | cs | 5 | Compulsory-optional | Cr,Ex | P - 39 / CPP - 26 | 3 | yes |
EAC | Application of CAD/CAM in Machining Technology I | cs | 4 | Elective (voluntary) | Cr,Ex | P - 26 / CPP - 26 | yes | |
0ZP | Aventics Pneumobil Racing | cs | 3 | Elective (voluntary) | GCr | L - 26 / L - 26 / C1 - 13 / C1 - 13 | yes | |
0ZC | Academic Sources and Citations | cs | 2 | Elective (voluntary) | Cr | CPP - 13 | yes | |
0PE | Practical Energetics | cs | 2 | Elective (voluntary) | Cr | C1 - 39 | yes | |
0PM | Practical Metallography | cs | 2 | Elective (voluntary) | Cr | P - 13 / L - 26 | yes | |
0AT | Seminar of Applied Thermomechanics | cs | 0 | Elective (voluntary) | Cr | CPP - 26 | yes |
Abbreviation | Title | L. | Cr. | Com. | Compl. | Hr. range | Gr. | Op. |
---|---|---|---|---|---|---|---|---|
6B | Bachelor Project | cs | 5 | Compulsory | Cr | VB - 78 | yes | |
6EE | Electrical Engineering and Electronics | cs | 5 | Compulsory | Cr,Ex | P - 39 / L - 26 | yes | |
5HY | Hydromechanics | cs | 5 | Compulsory | Cr,Ex | P - 39 / C1 - 18 / CPP - 8 | yes | |
6A | Bachelor Seminar | cs | 2 | Compulsory | Cr | C1 - 26 | yes | |
6KM | Machine Design - Mechanisms, 3D Print and Solidworks | cs | 4 | Compulsory-optional | GCr | P - 26 / L - 8 / CPP - 18 | 4 | yes |
6KP | Solution of Basic Problems of Solids Mechanics by FEM | cs | 4 | Compulsory-optional | GCr | P - 26 / CPP - 26 | 4 | yes |
6T3 | Technology III | cs | 4 | Compulsory-optional | GCr | P - 26 / L - 26 | 4 | yes |
6KT-A | Machine Design - Mechanical Drives | en | 4 | Compulsory-optional | Cr,Ex | P - 26 / CPP - 26 | 5 | yes |
6KT | Machine Design - Mechanical Drives | cs | 4 | Compulsory-optional | Cr,Ex | P - 26 / CPP - 26 | 5 | yes |
FAC | Application of CAD/CAM in Machining Technology II | cs | 3 | Elective (voluntary) | GCr | P - 26 / CPP - 26 | yes | |
0KT | Air Conditioning and Heat Pumps | cs | 0 | Elective (voluntary) | Cr | C1 - 26 | yes | |
FLE | Aircraft | cs | 3 | Elective (voluntary) | GCr | P - 26 / C1 - 13 | yes | |
PST | Statistical Methods in Engineering | cs | 4 | Elective (voluntary) | Cr,Ex | P - 26 / CPP - 13 | yes | |
0PP | Selected Topics in Strength of Materials | cs | 2 | Elective (voluntary) | Cr | P - 26 / P - 26 | yes |
Abbreviation | Title | L. | Cr. | Com. | Compl. | Hr. range | Gr. | Op. |
---|---|---|---|---|---|---|---|---|
5AZ | English - Basic Exam | en | 6 | Compulsory-optional | Ex | Z - 1 | English | yes |
7AZ | English - Exam B1 | en | 6 | Compulsory-optional | Ex | Z - 1 | English | yes |
All the groups of optional courses | ||
---|---|---|
Gr. | Number of courses | Courses |
English | 1 | A3, A5 |
1 | 1 | 5FM, 5PP-A, 5PP |
4 | 1 | 6KM, 6KP, 6T3 |
English | 1 | A4, A6 |
English | 1 | A3, A5 |
English | 1 | A4, A6 |
2K | 1 | 2K-A, 2K |
2 | 1 | 6MS, 6SR, 6SM |
English | 1 | 5AZ, 7AZ |
3CD | 1 | 3CD, 3CD-A |
strenght and stress | 1 | 4PP-A, 4PP |
5 | 1 | 6KT-A, 6KT |
3 | 1 | 5KS-A, 5KS |
2F | 1 | 2F, 2F-A |
1CH | 1 | 1CH-A, 1CH |
1IN | 1 | 1IN-A, 1IN |
2M | 1 | 2M, 2M-A |
1K | 1 | 1K-A, 1K |
2NU | 1 | 2NU, 2NU-A |
2VT | 1 | 2VT, 2VT-A |
1M | 1 | 1M-A, 1M |
1PG | 1 | 1PG-A, 1PG |
BUM | 1 | BUM-A, BUM |